Printing parameter

 Printing parameter for Ackuretta Freeshape (LCD)

The printing parameter of the Enlighten Materials resin were already built-in in the Ackuretta Freeshape software.

The detailed parameters will be listed here very soon.

 

 Printing parameter for Miicraft ultra printer (DLP)

Layer number and thickness
Base layerBuffer layerNormal layer
Number of layers3 layers10-20 layersDepends on models
Layer thickness50~100 μm50~100 μm50~100 μm
Printing time (Seconds)
ResinsBase layerBuffer laterNormal layer
New AA Temp15~20sAutomatically calculated by printer software3s
New BB Base15~20sAutomatically calculated by printer software3s
CC Tray15~20sAutomatically calculated by printer software3s
DD Guide15~20sAutomatically calculated by printer software3.5s
Dental model15~20sAutomatically calculated by printer software3s

Please note:

1.The printing time can vary according to the resin temperature (or room temperature) and intensity of the light source. Please modify the printing time accordingly.

2.For base layers, use 15s for small models and 20s for large models.

3.For other DLP 3D printers, the parameters should be modified.

 Printing parameter for Phrozen shuffle 3D printer (LCD)

Layer number and thickness
Base layerNormal layer
Number of layers6 layersDepends on models
Layer thickness50 μm100 μm or 50 μm
Printing time (Seconds)
ResinsBase layerNormal layer
New AA Temp6013
New BB Base6013
CC Tray6012
DD Guide for LCD6016
Dental model6012

Please note:

1.The printing time can vary according to the resin temperature (or room temperature) and intensity of the light source. Please modify the printing time accordingly.

2.For DD guide, use DD guide for LCD for LCD 3D printers.

3.For other LCD 3D printers, the parameters should be modified.

 Printing parameter for Formlabs Form 2 (SLA)

Formlabs Form 2
ResinsPrinting program
New AA TempDenture Teeth A2
New BB BaseDenture Teeth A2
CC TrayDenture Teeth A2
DD GuideDenture Teeth A2
Dental modelDenture Teeth A2

Please note:

Please note:

1.Use the GREEN LT tray ONLY. Don’t use the regular orange tray.

2.Enable the “OPEN MODE” for 3rd part resin printing.

3.The heating and wiper function are automatically disabled by Form 2 in “OPEN MODE”.