NEW AA temp 3D printing resin for provisional restoration
Enlighten AA TEMP 3D printing resin for temporary restorations, is a biocompatible resin with high strength, high surface hardness and low shrinkage. It can be used for DLP, SLA and LCD 3D printers, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It can also work for 385 and 405nm light source. Currently, we are working on its FDA submission for class II medical devices.
| Property | ISO standard | Requirement | Our results |
|---|---|---|---|
| Flexural strength | ISO10477 | ≥50 MPa | 82.35 MPa |
| Water sorption | ISO10477 | ≤40 µg/mm3 | <25 µg/mm3 |
| Water solubility | ISO10477 | ≤7.5 µg/mm3 | <1.5 µg/mm3 |
| Surface Hardness | ISO187 | ≥80 Shore D | 84.65 |
| Viscosity | N/A | N/A | ~498 cps |
| Cytotoxicity test | ISO10993-5 | Non-cytotoxic | Comply |
| Irritation test | ISO10993-10 | Cause no irritation | Comply |
| Sensitization test | ISO10993-10 | Cause no sensitivity | Comply |
| Acute systemic toxicity | ISO10993-11 | Cause no acute systemic toxicity | Comply |
| Genotoxicity test | ISO10993-3 | Cause no genotoxicity | Comply |
NEW BB base 3D printing resin for denture base
Enlighten BB BASE 3D printing resin for denture base, is a biocompatible resin with high strength, high surface hardness and low shrinkage. It can be used for DLP, SLA and LCD 3D printers, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It can also work for 385 and 405nm light source. Currently, we are working on its FDA submission for class II medical devices.| Property | ISO standard | Requirement | Our results |
|---|---|---|---|
| Flexural strength | ISO20795-1 | ≥65 MPa | >85.2 MPa |
| Flexural modulus | ISO20795-1 | ≥2000 MPa | >2049 MPa |
| Water sorption | ISO20795-1 | ≤32 µg/mm3 | <26.5 µg/mm3 |
| Water solubility | ISO20795-1 | ≤1.6 µg/mm3 | <1 µg/mm3 |
| Residual MMA monomer | ISO20795-1 | ≤2.2 %(w/w) | 0% |
| Surface Hardness | ISO187 | ≥80 Shore D | 87.25 |
| Viscosity | N/A | N/A | ~1180 cps |
| Cytotoxicity test | ISO10993-5 | Non-cytotoxic | Comply |
| Irritation test | ISO10993-10 | Cause no irritation | Comply |
| Sensitization test | ISO10993-10 | Cause no sensitivity | Comply |
| Acute systemic toxicity | ISO10993-11 | Cause no acute systemic toxicity | Comply |
| Genotoxicity test | ISO10993-3 | Cause no genotoxicity | Comply |
CC tray 3D printing resin for custom tray
Enlighten CC TRAY 3D printing resin for custom tray, is a biocompatible resin with high strength, high surface hardness and low shrinkage. It can be used for DLP, SLA and LCD 3D printers, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It can also work for 385 and 405nm light source. Currently, it has obtained the approval for TFDA class I medical devices.
| Property | Our results |
|---|---|
| Flexural strength | 95 MPa |
| Flexural modulus | 2397 MPa |
| Surface Hardness | ~78 |
| Viscosity | ~740 cps |
| Biocompatibility | Comply |
DD GUIDE dental surgical guide (3D printing resin)
Enlighten DD GUIDE 3D printing resin for surgical guide, is a Class I biocompatible resin with high strength, high surface hardness and low shrinkage. It was approved by TFDA and CE-registered. DD guide has 3 different versions, namely DD guide, DD guide for LCD, and DD guide for SLA. So it can be used for almost all printers in the market, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It has been used extensively by the universities, medical centers and dental clinics in Taiwan.| Property | Our results |
|---|---|
| Flexural strength | 90 MPa |
| Flexural modulus | 1907 MPa |
| Surface Hardness | ≥80 Shore D |
| Viscosity | 720 cps |
| Biocompatibility | Comply |
3D printing resin for dental models
Enlighten DENTAL MODEL 3D printing resin for dental models, is a biocompatible resin with high strength, high surface hardness and low shrinkage. It can be used for DLP, SLA and LCD 3D printers, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It can also work for 385 and 405nm light source.
| Property | Our results |
|---|---|
| Flexural strength | 92 MPa |
| Flexural modulus | 1875 MPa |
| Surface Hardness | 86 |